Cllena Quick Charge 3.0 & PD USB C Dual USB Port Charger Socket Power Adapter for Toyota

Bought this based on all the glowing reviews. Was glad to see that it looks like it could pass for a factory port. Replaced the AUX socket located just forward of the elbow console. Direct drop into the socket with a snug fit. Everything looked great until I tried to plug a USB into the 3.0 slot. It took the might of God to wrestle it into the slot. The 2.4 slot didn't have any issues, only the QC3.0 slot.Ordered a replacement to see if it's any better. IF the replacement is better off, i'll happily update this to 5 stars. As it sits though, this is quite annoying and almost unusable. No more than 2 stars as it sits now.Will update once the new one arrives.EDIT - 3/29/19The replacement item was MUCH better than the first one I received. It still seemed tighter than you would want but was acceptable.A heads-up to other 2006-2012 RAV4 owners planning to put this where the old AUX slot was located (next to mirror adjusters) - it DOES fit in the opening but it is EXTREMELY tight. While it does work, its such a tight opening that it does apply extra pressure to the USB port slot, and if it's already extremely tight before pushing the socket into the slot, the actual USB port will now be even tighter.The quick charging does work, and quite well I might add. Will make you wonder why you used that old 12V USB adaptor for so long all these years!

The media could not be loaded. I'll likely be the odd one out here. I installed on a 2005 Chevrolet Silverado WT. My truck is kind of a Frankenstein monster - there are many parts from various other GM products that are essentially plug-n-play, but they are/have features my base truck did not come with so I added them.Since the 2005 Silverado is a base (WT - work truck), it did not have a fold down center seat between the driver and passenger; I wanted one so I would also have an arm rest. The center jump seat is half 2010 Silverado (lower portion) and half 2018 Silverado (upper portion). On the 2018 Silverado, the center jump seat does come with 2 USB ports where I installed this item; however, it would require much more work to make the factory GM USBs to work. Thus I used this "Cllena Dual USB Port Charger Socket Quick Charge 3.0 & 2.4A for Toyota" unit.The unit works well and I like the fact that it has lit USBs and that they are color coded. I have it wired to be ON with the key-on and OFF when the key-off rather than wiring it to be on with RAP (retained accessory power - not sure what Toyota may call it) This you can see on the video. In the 2 photos, you can tell that the aftermarket USB does not fit the GM hole - obviously I didn't expect it to. It's a 2005 and this allows me to have modern day charging for my mobile device.I'll update if there is premature failure.Edit: well damn; amazon really degrades the video quality.

This product meets my expectations. It's kept my smartphone (a Pixel 2 XL) charged, and while I've only taken it for a couple of drives so far, I haven't experienced any of the power issues I've had with other USB power sources.But I wish the Molex connector didn't come with wires attached, because they were shorter than what I needed. They weren't hard to extend with butt splice crimp connectors, but it would be better if it was possible to attach the wire directly to the Molex connector, and avoid the extra connections.UPDATE: One of the USB connectors stopped working (and emitted a bad smell) a few weeks after I installed it. But the seller sent me a new one, and I haven't had any problems with that.

Everyone writes reviews but many don't include what they put it in. Fits center console, pic included. It's a little tight but does fit but I wish they'd jus leave cut wires because the battery terminal connection makes no sense when it's only 10" long and gets chopped off anyways. Great product and works and looks awesome!

Installed in 08 tundra, fit perfectly. My advice would be to wire it to a circuit that gets a continuous 12v when the truck is running. If you go straight to the battery the meter stays on with truck off (obviously). It’s not a huge drain on the battery and probably wouldn’t cause any issues as it’s no different than the anti theft light that flashes in most vehicles.

Looks super quality. Unfortunately it doesn't fit my 5th gen 4Runner. The specs are a little off in the switch. Going to try and return to order another one. Maybe the one i ordered was cut a fraction to large. Fingers crossed

I installed this in a blank space in the forward center console of my 2015 Toyota Tundra CrewMax. The install is straight forward and the fit looks factory. Both sockets light up Orange for the 3.0a and Blue for the 2.4a, which is a nice addition for my mount location. They both worked great after install, but the next day the 2.4a (blue LED) socket stopped sending power and the LED intermittently flashes or is off. The 3.0a socket still works fine, so I haven't replaced it yet.For the price, the fit and finish is great, but the flaky 2.4a socket was cause for a couple stars getting knocked off. If the supplier could get this taken care of, this would definitely be a 5 star product.

After I installed one of these things immediately, I bought another. It looks and performs exactly as described. Looks very neat and fits in perfectly. You would think it was originally installed at the factory. I had these installed on 2006 4runner limited. They pop right in and sit firmly in the original rectangular holes. Even the color matches other switches perfectly. I wired both into cigarette lighter outlet in the center console. They come on when the ignition is on only, so that they do not drain your battery.